MAG CCS 015
MAG CCS 015 conformal coating is a rapid drying acrylic for circuit board protection applications. We are silicone conformal coating spray manufacturer in india.
Drying of the coating depends upon solvent evaporation. For optimum performance, boards should be dried at least 30 minutes at 25°C to remove solvents before final drying in oven (or before applying additional coats).Silicone conformal coating spray drying temperatures higher than recommended could cause formation of bubbles if bulk solvent is not allowed to evaporate before placing in oven. Optimization of the drying schedule may be possible to reduce the times stated above. Ultimately, drying times will depend on film thickness and circuit board design. It is therefore imperative to verify the drying schedule for each application. Deaeration is not suggested due to a risk of solvent loss.
