SMT GLUE

MAG SMT GLUE –RED and YELLOW is a thermo-setting epoxy adhesive that has the property of preservation stability and is used for chip or SMD mounting machines. SMT Yellow Glue (Called also SMT Red Glue , SMT Adhesive) has high heat-resistivity and excellent electrical properties. It’s high curing temperature and longtime makes it excellent in micro printability with suitably high speed dispensers. SMT Glue is soldering glue for electronics and PCB helps you obtain stable curing shapes without stringing and slumping at super high speed dispensing including pretty small dots.

• Much lower temperature curing is practically performed.
• Very good stable curing shapes without stringing and slumping at super high speed dispensing and pretty small dots.
• Stable adhesive strength can be obtained with a variety of SMDs.
• Long-term preservation stability is expected.
• High heat-resistivity and excellent electrical property are possessed.

The recommended curing condition is 90-120s at 120℃ or 60-90s at 150℃. The higher curing temperature and the longer time can obtain the stronger adhesive strength. It is suggested that an optimum series of curing conditions should be searched out, for the temperatures exerted on dispensed adhesive may occasionally vary according to the sizes, the lay-out, etc. of component parts to be mounted on PCB’s.

• On account of proper viscosity value and thixo ratio for screen printing, no spreading of printing patterns is likely to occur.
• Being a single part adhesive, it has excellent stability against a long period of storage time.
• Having high green strength, no skewing of chips under high speed mounting will take place.